General Placeholder for ongoing issues-in progress

---

Discovered 2 issues- the upper radiator hose fit but did not allow room for fan-  This was anticipated to be problematic but not like this.   You have to use the thermostat housing from the M30b35 as the angle of outlet must angle a few degrees downward to clear the end of the cylinder head with the distributor assembly.  This means the curvature of the stock e3 radiator hose will work.   I will come back to how i corrected this later but the note I need to make is that you must use the e3 type water pump with the M8 bolt end.  This is because the e34 fan will not fit with the radiator in place.   I discovered this late in the game and now I have to pull the radiator, pump etc.    USE THE E3 Pump and Fan Assembly.  You might be able to fit an electric fan but I am not interested in pursuing this solution.

Bplace text

text

text

text

text